A step-by-step guide on how to repair tpe sex dolls

Hot towel application

This simple repair process only requires a warm towel to quickly cover the visible dents on the doll. Once the damaged part becomes hot, wear gloves and pat the damaged area with your hands, alternating these steps until it is flat and no longer visible.

A hair dryer seems to be not only useful for our hair, although most of us think this tool is only for drying and wetting hair, it is actually an excellent way to repair your TPE doll.

This method requires a clean wet towel. To avoid dirtying the doll, use a white cloth as much as possible, cover the dents with a damp towel, and heat with a hair dryer. After continuous heating, it will be noticed that the dents will gradually disappear.

Repair scratches on dolls

In addition to indentation, another common damage that physical dolls may suffer is abrasion and tearing, and these methods can be used to repair such damage.

After finding the torn area, use a pointed tool to apply a small amount of TPE adhesive. Then, pull the torn sides together and hold for a few minutes until they are fully closed. Before applying glue, ensure that the damaged area is completely clean and can be cleaned with 70% isopropanol cleaning solvent.

Apply TPE adhesive evenly on the inner side of the tear with a spatula, avoiding excessive TPE adhesive on the spatula as it can cause too much adhesive to spread to the doll's skin. After sealing the torn area, wipe off excess glue with a clean cloth. Avoid using your fingers to remove glue, as this can cause unnecessary marks on the doll. Finally, leave the doll alone for 24 hours.

Use a hot air gun to smooth out any scratches on the surface of the doll

The first thing is to clean the damaged surface of the doll with Vaseline or baby oil. In addition to cleaning, they can also make the heat distribution more even. After applying baby oil or Vaseline, start aiming the hot air gun at the damaged area.

Pay attention to the distance between the hot air gun and the doll's skin, do not align the gun too closely, otherwise it will cause serious burns to the skin, and maintain a distance of at least 10cm. The melting point of TPE dolls is approximately 110 ℃. Once it begins to melt, you will see a mirror like glaze, and when to stop depends on the smoke generated during heating.

After heating to the appropriate temperature, gently wipe the irregular scratches on the surface of the doll with a clean cloth. After repeated heating and cooling, the damaged area will become smooth. It is worth noting that the temperature of the heated surface will decrease rapidly. Therefore, it is necessary to eliminate wear and tear as soon as possible after discontinuing the use of the hot air gun.

You can use a similar process mentioned above to repair facial incisions on tpe sex dolls. However, it requires a lot of practice to complete perfectly. You need the correct tools and stable hands to repair the small incision on the TPE doll.